What does Mella Paint make?
MPEX767 SL, a self-levelling epoxy floor system that we manufacture ourselves. UV Coating is a protective layer we apply over it.
We make MPEX767 SL ourselves, rather than buying it from another manufacturer. So we can sell it, install it, and answer for the result. UV Coating is not our own make, we offer it as a finishing service.
MPEX767 SL
Self-levelling epoxy for floors that carry heavy loads, chemicals and daily traffic. It finishes flat, smooth and easy to clean.
- Type
- Self-levelling (SL) epoxy floor
- System
- Primer Coat, self-leveller, Top Coat
- Thickness
- 500 microns minimum
- Dry time
- Primer 3 hours, top coat 12 hours
- Colours
- 12 standard colours
- Ordering
- Made to order, minimum 3 pail sets
UV Coating
A UV-cured protective layer applied over epoxy. It dries fast, bonds strongly and adds scratch resistance to a floor that is already coated.
- Function
- Protective layer over epoxy
- Curing
- Ultraviolet (UV) light
- Benefits
- Fast drying, strong adhesion, scratch resistant
- Service
- Applied by the Mella Paint crew
Have our crew install it, or buy the paint only
Installed by our crew
We survey the site, choose the right coating system, and install it. Material and workmanship come from one company, so if something goes wrong you know exactly who to call. Minimum area 100 m2.
Why this mattersBuy the paint only
MPEX767 SL is sold by the set on pre-order. Each order is produced for you, minimum 3 pail sets, with no ready stock.
See MPEX767 SL
Material and installation from one company.
Most epoxy contractors buy their paint from someone else. We make ours in Tangerang and install it with our own crew, so responsibility for your floor is never split.
- SurveyOur team visits the site, checks the concrete, and recommends the coating system and thickness.
- ScheduleWork can be split by zone so the facility keeps running. On average about 1,000 m2 is finished in 7 working days.
- MaterialEvery batch is recorded, so the material in your floor can be traced back to its production.
- AccountabilityIf there is a problem, you call one party. No finger-pointing between a paint supplier and an applicator.
Book a site surveyMinimum area 100 m2. Written quote sent after the survey.
Product questions
What is the difference between MPEX767 SL and UV Coating?
MPEX767 SL is the main layer; UV Coating is a protective layer on top of it. MPEX767 SL forms a flat, hard self-levelling epoxy floor. UV Coating is applied over the epoxy to add scratch resistance, and it dries fast because it cures under UV light. MPEX767 SL is our own product, while UV Coating is a finishing service we provide, not a coating we manufacture.
Can I buy Mella Paint coatings without installation?
Yes. MPEX767 SL is sold by the set on a pre-order basis, minimum 3 pail sets. Every order is produced in our factory, so there is no ready stock.
Does Mella Paint take projects outside Jabodetabek?
Yes, for larger projects. Most of our work is in Greater Jakarta, but we also take projects as far as Central and East Java.
Where are Mella Paint coatings made?
In our own factory in Tangerang, Banten, Indonesia. Every batch is recorded, so the material used on a project can be traced back to its production.
Tell us about your floor.
Send the facility type, the approximate area and the current floor condition. We will help you choose a system, or work out how many sets you need.